EMU BLACK ON Renault

Support for EMU BLACK device
Post Reply
fabien _45
Posts: 5
Joined: Fri Jun 01, 2018 6:35 pm

EMU BLACK ON Renault

Post by fabien _45 » Fri Jun 01, 2018 6:48 pm

I have mount EMU Black on Renault, but i can't start engine, i don't know trigger Wheel setup
TRIGGER WHEEL RENAULT.JPG
how know good setup ?

Thanks for your help

Fab

Karel
Posts: 401
Joined: Wed Sep 10, 2014 11:58 am
Location: Czech Republic
Contact:

Re: EMU BLACK ON Renault

Post by Karel » Sat Jun 02, 2018 7:28 pm

If you knowledge is so bad like your post is.... there is no way to help you.

What model of Renault ? DO you have better photo then just 5 tooths of the flywheel ?

fabien _45
Posts: 5
Joined: Fri Jun 01, 2018 6:35 pm

Re: EMU BLACK ON Renault

Post by fabien _45 » Sat Jun 02, 2018 9:14 pm

Emu black was wired on Renault Clio 3 RS, flywheel is mount on engine , I haven’t photo, all latest Renault have the same flywheel 60 tooth, I have found this photo
Let me know

Thank for your help
Attachments
520200A9-DECF-47D4-BACB-E758DCF8222D.jpeg

Karel
Posts: 401
Joined: Wed Sep 10, 2014 11:58 am
Location: Czech Republic
Contact:

Re: EMU BLACK ON Renault

Post by Karel » Sun Jun 03, 2018 9:33 pm

then this will be 60-2

fabien _45
Posts: 5
Joined: Fri Jun 01, 2018 6:35 pm

Re: EMU BLACK ON Renault

Post by fabien _45 » Wed Jun 27, 2018 8:25 pm

Hi,

thanks, now engine start Wheel but i can't read camsyn , here my trigger cams. read signal fail.

it's 12v hall sensor but internal pullup do it it with 5V ?
scope_2018627_203.rar
(318 Bytes) Downloaded 17 times
The attachment scope_2018627_203.rar is no longer available
Thanks for your help

fabien _45
Posts: 5
Joined: Fri Jun 01, 2018 6:35 pm

Re: EMU BLACK ON Renault

Post by fabien _45 » Wed Jun 27, 2018 8:26 pm

the cams teeth
IMG_7961.JPG

Post Reply
stół kuchenny okrągły

Who is online

Users browsing this forum: No registered users and 2 guests