2jzgte dbw

Support for EMU BLACK device
Post Reply
Posts: 3
Joined: Thu Nov 30, 2017 1:40 am

2jzgte dbw

Post by Kontraburna » Tue Feb 13, 2018 8:17 pm

hello i am having a problem with emu black and drive by wire.. i have a 2jzgte vvti with a 22030-46160 throttle body .. i have it wires just as the manual says.

the throttle motor connected to h-bridge 1 channel (positive a ) (negative b).

pedal position sensor connected to tps in for the main and analog 6 for the secondary .

tps connected to analog 1 and analog 4

and i have the clutch wired to a 12v relay

i calibrated my sensors but i still cant seem to get it right..

i opened up the throttle by hand all the way and closed it a couple of times and made a log to record the sensor values but something still seems to be off..

it seems like the h-bridge is not sending power to open and close the throttle.

do i have it wired wrong? do i have it setup wrong in the software? am i missing something?

https://drive.google.com/file/d/11DQqos ... sp=sharing

https://drive.google.com/file/d/1ut550f ... sp=sharing

Post Reply
stół kuchenny okrągły

Who is online

Users browsing this forum: No registered users and 1 guest