EGT2CAN firmware????

ECUMASTER products based projects
Post Reply
imakehp
Posts: 7
Joined: Sun Dec 02, 2018 2:00 am

EGT2CAN firmware????

Post by imakehp » Tue Dec 04, 2018 10:59 am

Since there doesn't seem to be any actual support for ECUMaster products, is the any chance I can get firmware for the EGT2CAN that at least calibrates and displays in Fahrenheit instead of Celsius...
As a mater of fact ANY files, software or documentation on the module would at least give me a chance at getting it to work with my ECU.....
I was told on the phone before purchasing this controller that it could be used with most ECUs......

Karel
Posts: 408
Joined: Wed Sep 10, 2014 11:58 am
Location: Czech Republic
Contact:

Re: EGT2CAN firmware????

Post by Karel » Wed Dec 05, 2018 11:01 pm

You can do the math yourself.

°F= (1.8 x °C) + 32

Then you have displayed in °F

imakehp
Posts: 7
Joined: Sun Dec 02, 2018 2:00 am

Re: EGT2CAN firmware????

Post by imakehp » Thu Dec 06, 2018 12:25 am

Thank you for the response Karl........I assume I would have to edit that formula into the .ini file somewhere? I can't find any setup screens to do it...


Dave

Post Reply
stół kuchenny okrągły

Who is online

Users browsing this forum: No registered users and 1 guest