Turbo Matiz project

ECUMASTER products based projects
Post Reply
Jean Niemi
Posts: 118
Joined: Sat Aug 16, 2014 7:05 am
Location: Finland
Contact:

Turbo Matiz project

Post by Jean Niemi » Fri Jan 01, 2016 12:11 pm

This is Daewoo Matiz 1.0 turbo with DET3 in FIT mode. (Sorry about the front bumber not yet fitted in the photo):
Image

I had some spare time at our dyno on the Christmas Day and here are some graphs before and after the conversion. Now I am using 0,8bar boost and E85 fuel. Exhaust system is standard from the turbo downpipe to tailpipe (original catalysator and both silencers are still there), so it is very silent car:
Image

See the whole story at Facebook with some videos:
https://www.facebook.com/turbomatiz
Do you like it?

User avatar
Jadzwin
Site Admin
Posts: 1438
Joined: Tue Aug 12, 2014 11:27 pm

Re: Turbo Matiz project

Post by Jadzwin » Sat Jan 02, 2016 8:54 pm

I like it very much! It is crazy idea to turbocharge Matiz :)

Jean Niemi
Posts: 118
Joined: Sat Aug 16, 2014 7:05 am
Location: Finland
Contact:

Re: Turbo Matiz project

Post by Jean Niemi » Sun Jan 03, 2016 6:39 pm

One funny coincidence: Original Matiz ECU has similar 90 pin FCI connector than the new EMU PRO will have.
So, it will be a plug-in solution... ;)

Jean Niemi
Posts: 118
Joined: Sat Aug 16, 2014 7:05 am
Location: Finland
Contact:

Re: Turbo Matiz project

Post by Jean Niemi » Thu Jan 07, 2016 3:45 pm

We have had pretty cold all this week (last night -25 Celsius and day time maximum at -20 Celsius) but still I got my little Matiz alive and running after standing outside all week.
And this was with E85 fuel, which is extremely difficult to ignite when cold. I did not use any engine heater, but neither did it start like under a palm tree ;)
We would need more values to coldstart map axles in the software in order to get more fuel and E85 to burn.
Image

PSI-Motor
Posts: 437
Joined: Fri Aug 15, 2014 10:57 pm

Re: Turbo Matiz project

Post by PSI-Motor » Thu Jan 07, 2016 4:48 pm

Love your Matiz Jean :D
EcuMaster Sweden

StanleyOn
Posts: 4
Joined: Thu Apr 28, 2016 12:08 pm
Location: Ireland
Contact:

Turbo Matiz project

Post by StanleyOn » Thu Apr 28, 2016 2:11 pm

Hi Steven
Are you going to take the Road Kings with you as well???
hello

WHPZach
Posts: 180
Joined: Tue Oct 07, 2014 11:13 pm

Re: Turbo Matiz project

Post by WHPZach » Tue May 03, 2016 7:08 pm

Don't forget to take the monitors off the windscreen before you drive it :) Looks like a fun car!

mrmc
Posts: 1
Joined: Mon Nov 21, 2016 3:15 pm

Re: Turbo Matiz project

Post by mrmc » Thu Sep 28, 2017 8:59 am

hallo from denmark, is this car still running ? and du you have a video vhere it is running. so funny projekt.

Jean Niemi
Posts: 118
Joined: Sat Aug 16, 2014 7:05 am
Location: Finland
Contact:

Re: Turbo Matiz project

Post by Jean Niemi » Sun Oct 01, 2017 10:31 am

Yes, it is running all right! Not everyday, as I have so many other "toys".

See more ( even some videos), and thumb up if you like it:
http://facebook.com/turbomatiz

While looking at the weather forecast, it is soon time to put studded tires again :(

Maybe some day I will try it on the dyno without the standard exhaust mufflers (which I think, are somewhat restricting...)

Post Reply
stół kuchenny okrągły

Who is online

Users browsing this forum: No registered users and 1 guest