Toyota starlet gt ep82 (4efte)

ECUMASTER products based projects
Post Reply
User avatar
ktsirigotakis
Posts: 66
Joined: Sat Aug 16, 2014 8:39 am

Toyota starlet gt ep82 (4efte)

Post by ktsirigotakis » Mon Aug 18, 2014 10:32 pm

This car was my first steps on tuning cars. I started with ECUMASTER products and I don't care abut other engine management systems

so

my friend dinos has a Toyota starlet gt turbo ep82

Engine: 4efte ep82
forged pistons wossner std
forged rods
std head gasket
std head bolts (didn't know that when I was turning up the boost!!!)
4 pucks clutch
TRD ignition leads
440cc fuel injectors (impreza light blue)
255 fuel pump
IHI Vf34 (some damage was on the turbine side)
external wastegate 38mm emusa
60mm exhaust single tube at the front bumper
shorted transmission ratios
Ecumaster Det3 400kpa
1.5bar 319hp
IMG_1081.JPG
IMG_1157.JPG
IMG_1086.JPG
engine was bought used and we opened the engine to put arp head studs, metallic head gasket, port and polish and we found out that the engine had cr 7.3:1 now we are closing the engine with aprox. cr 7.8 :1 also my friend bought a used very good condition Vf34.

User avatar
Jadzwin
Site Admin
Posts: 1438
Joined: Tue Aug 12, 2014 11:27 pm

Re: Toyota starlet gt ep82 (4efte)

Post by Jadzwin » Wed Aug 20, 2014 4:53 pm

Nice killer :) Many people on the road must be surprised...

nigel
Posts: 2
Joined: Mon Mar 14, 2016 6:27 pm
Location: Antigufa

Re: Toyota starlet gt ep82 (4efte)

Post by nigel » Fri May 19, 2017 6:03 pm

ktsirigotakis wrote:This car was my first steps on tuning cars. I started with ECUMASTER products and I don't care abut other engine management systems

so

my friend dinos has a Toyota starlet gt turbo ep82

Engine: 4efte ep82
forged pistons wossner std
forged rods
std head gasket
std head bolts (didn't know that when I was turning up the boost!!!)
4 pucks clutch
TRD ignition leads
440cc fuel injectors (impreza light blue)
255 fuel pump
IHI Vf34 (some damage was on the turbine side)
external wastegate 38mm emusa
60mm exhaust single tube at the front bumper
shorted transmission ratios
Ecumaster Det3 400kpa
1.5bar 319hp
IMG_1081.JPG
IMG_1157.JPG
IMG_1086.JPG
engine was bought used and we opened the engine to put arp head studs, metallic head gasket, port and polish and we found out that the engine had cr 7.3:1 now we are closing the engine with aprox. cr 7.8 :1 also my friend bought a used very good condition Vf34.

nice

Post Reply
stół kuchenny okrągły

Who is online

Users browsing this forum: No registered users and 1 guest