MIATA WRONG RPM READ DET3 +VIDEO

DET3 technical support
Post Reply
radulepy
Posts: 5
Joined: Tue Dec 11, 2018 5:11 pm

MIATA WRONG RPM READ DET3 +VIDEO

Post by radulepy » Sat Dec 15, 2018 8:12 pm

Hello guys,
I have a problem with my Det 3 in my 98' NB 1.6 Miata.
I connected the crank(ignition) senzor, the maf(analog 1), and the MAP(included) right after the throttle body, to the det3 and their output to the ecu.
The RPM output it higher than my cars tach (+800 ~ RPM).
And if i accelerate the line (in the table) only goes up and down and not right or left.
I don't know if the fuel map even works... ?
Any ideas ? Thank you!
The scheme i used and the video:
https://drive.google.com/open?id=1NUy0V ... 3Ayc9KsC7A
https://drive.google.com/open?id=1uK0Sd ... foGDZweSfN

mccolome
Posts: 3
Joined: Wed Jan 02, 2019 1:11 pm

Re: MIATA WRONG RPM READ DET3 +VIDEO

Post by mccolome » Fri Jan 04, 2019 9:15 pm

Wouldn't you need the TPS wired in too?

radulepy
Posts: 5
Joined: Tue Dec 11, 2018 5:11 pm

Re: MIATA WRONG RPM READ DET3 +VIDEO

Post by radulepy » Tue Feb 19, 2019 1:35 am

mccolome wrote:
Fri Jan 04, 2019 9:15 pm
Wouldn't you need the TPS wired in too?
no, i found out that Nb crank angle sensor is different as NA, so... not nice as the output is different, i will try hooking up to the ignition module, but i don't know how exactly

Post Reply
stół kuchenny okrągły

Who is online

Users browsing this forum: No registered users and 1 guest