AFR Spikes (2JZ-GTE)

All about our superior engine management unit.
Post Reply
SSC_Master
Posts: 7
Joined: Fri Dec 15, 2017 5:42 pm

AFR Spikes (2JZ-GTE)

Post by SSC_Master » Fri Jan 12, 2018 10:15 pm

Hi mates,

Actually I’m trying to find some good settings that the AFR values follows the AFR target table.
I’m 70% happy with the result. When I push the pedal the values reflects what’s written in the table.

My problem are these spikes at the begin and at the end of an acceleration sequence. (see pictures)
Have you any ideas which parameter I have to adapt in the EGO Feedback section to erase these spikes ?

Regards

The attachment AFR_1.jpg is no longer available
The attachment AFR_3.jpg is no longer available
AFR_1.jpg

daniel@post-haste.ca
Posts: 2
Joined: Mon Dec 19, 2016 2:08 am

Re: AFR Spikes (2JZ-GTE)

Post by daniel@post-haste.ca » Sat Jan 13, 2018 2:13 am

That's going to be in the Enrichment settings - check the log for your Enrichment's

Marc Knoll
Posts: 15
Joined: Tue May 19, 2015 8:08 pm

Re: AFR Spikes (2JZ-GTE)

Post by Marc Knoll » Sat Jan 13, 2018 2:40 am

First Spike >>> Throttle Enrichment
Second Spike >>> Fuel Cut settings

SSC_Master
Posts: 7
Joined: Fri Dec 15, 2017 5:42 pm

Re: AFR Spikes (2JZ-GTE)

Post by SSC_Master » Sat Jan 13, 2018 1:47 pm

Thank you very much for your answer.
I very appreciate it. Because it is new for me it’s
not so easy to see the influence of the different aspects.

Is it right to adapt the parameter to eliminate the first spike in the section (picture first spike) and for the second spike (picture second spike) ?

Yours sincerely
Attachments
Second Spike.jpg
Second Spike
First Spike.jpg
First Spike

Post Reply
stół kuchenny okrągły

Who is online

Users browsing this forum: No registered users and 2 guests