base map Mitsubishi Galant 4g64

All about our superior engine management unit.
Post Reply
wencel
Posts: 6
Joined: Wed Jul 06, 2016 12:10 pm

base map Mitsubishi Galant 4g64

Post by wencel » Fri Mar 17, 2017 12:39 pm

Hello,

Can someone share base map for Mitsubishi 4g64 2002 ? There are problems with the parameters Primary trigger and Secondary trigger
Thanks
Now we have
Attachments
20170314_2101.emulog
(456.83 KiB) Downloaded 8 times

roquete
Posts: 106
Joined: Fri Apr 24, 2015 9:08 pm

Re: base map Mitsubishi Galant 4g64

Post by roquete » Fri Mar 17, 2017 4:57 pm


wencel
Posts: 6
Joined: Wed Jul 06, 2016 12:10 pm

Re: base map Mitsubishi Galant 4g64

Post by wencel » Mon Mar 20, 2017 3:40 pm

Now as in the maps from the evo, but the car does not work. Evo, two camshafts, 4g64 one camshafts. How to choose the right second trigger?

roquete
Posts: 106
Joined: Fri Apr 24, 2015 9:08 pm

Re: base map Mitsubishi Galant 4g64

Post by roquete » Mon Mar 20, 2017 5:29 pm

4g64 may have SOHC or DOHC, which sensor do you have?
CAS module on the camshaft or crank and cam sensors separated?

wencel
Posts: 6
Joined: Wed Jul 06, 2016 12:10 pm

Re: base map Mitsubishi Galant 4g64

Post by wencel » Mon Mar 20, 2017 5:33 pm

roquete wrote:4g64 may have SOHC or DOHC, which sensor do you have?
CAS module on the camshaft or crank and cam sensors separated?
I have SOHC
two sensors, crank and cam sensors separated

roquete
Posts: 106
Joined: Fri Apr 24, 2015 9:08 pm

Re: base map Mitsubishi Galant 4g64

Post by roquete » Mon Mar 20, 2017 5:59 pm

sorry now i see you have already wired them up.
Just use the scope function of the software and post it here.

wencel
Posts: 6
Joined: Wed Jul 06, 2016 12:10 pm

Re: base map Mitsubishi Galant 4g64

Post by wencel » Mon Mar 20, 2017 6:03 pm

roquete wrote:sorry now i see you have already wired them up.
Just use the scope function of the software and post it here.
Here I saved
Attachments
scope_201714_1633.emuscp
(47 Bytes) Downloaded 13 times

roquete
Posts: 106
Joined: Fri Apr 24, 2015 9:08 pm

Re: base map Mitsubishi Galant 4g64

Post by roquete » Mon Mar 20, 2017 6:08 pm

why are you using cam#2?
post your project file, and how many thooth does the primary trigger have?

wencel
Posts: 6
Joined: Wed Jul 06, 2016 12:10 pm

Re: base map Mitsubishi Galant 4g64

Post by wencel » Tue Mar 21, 2017 10:15 am

roquete wrote:why are you using cam#2?
post your project file, and how many thooth does the primary trigger have?

Very strange, once showed it, I saved it.
I will attach another file later.
Attachments
galant-4g64-T-560ccзапустилась (1).emu
(77.95 KiB) Downloaded 15 times

roquete
Posts: 106
Joined: Fri Apr 24, 2015 9:08 pm

Re: base map Mitsubishi Galant 4g64

Post by roquete » Tue Mar 21, 2017 11:05 pm

you have the same settings i have for a evo3 with cas on camshaft like this:
evo3cas.jpg
evo3cas.jpg (7.67 KiB) Viewed 265 times
these are my settings:
evo3.JPG
if your trigger on crankshaft is only 2 teeth like this settings are ok maybie you need to enable pullup
4g6tigger.jpg
4g6tigger.jpg (3.75 KiB) Viewed 265 times

Post Reply
stół kuchenny okrągły

Who is online

Users browsing this forum: fataznwithcake and 1 guest