Search found 23 matches

by Racekid21
Wed Apr 05, 2017 8:19 am
Forum: EMU STANDALONE
Topic: Autotune seems to work incorrect
Replies: 3
Views: 1442

Autotune seems to work incorrect

Hello guys, I would like to ask you, how your Autotune works. I set up everything correctly, but if I run Autotune, it always corrects my VE way too lean. Why does Autotune do that ? Do I need to set up any other parameters then VE, Lambda and how much Autotune will correct and under which condition...
by Racekid21
Wed Mar 29, 2017 3:51 pm
Forum: EMU STANDALONE
Topic: Haldex controlling by Emu- PWM
Replies: 10
Views: 4411

Re: Haldex controlling by Emu- PWM

I dort want to controll the pump. The pump always stays at the same Dc. We need to controll the inside stepper. It is bipolar, so stepper 1a,b and 2a,b are needed. Bitte I dont Know, how I can tell The ecu to controll these 4 Outputs. I dont think, that The Adminis will help us, because then they wo...
by Racekid21
Sun Mar 26, 2017 1:19 pm
Forum: EMU STANDALONE
Topic: Ecumaster Haldex Controller
Replies: 0
Views: 1799

Ecumaster Haldex Controller

Hey everyone! A friend just got his haldex drag racing controller- including a modified Unit. He asked me, how the thing gets connected... So, VSS Input comes direct from the gearbox sensor? What about Analog In#1? The wiring diagram isn't very helpful for me. Is it possible to controll the unit wit...
by Racekid21
Wed Mar 09, 2016 8:23 pm
Forum: EMU STANDALONE
Topic: VW 16v ABF Trigger setup
Replies: 5
Views: 1365

Re: VW 16v ABF Trigger setup

It's a 4 window Dizzy.

I will remove 3 of 4 Flaps.

There are two types of ABF Dizzys...How ever it's a 4 window trigger.

Thanks alot

Vielen Dank :-)
by Racekid21
Wed Mar 09, 2016 11:02 am
Forum: EMU STANDALONE
Topic: VW 16v ABF Trigger setup
Replies: 5
Views: 1365

Re: VW 16v ABF Trigger setup

Kannst du mir mal privat schreiben? :D

Thanks for the qiuck answer, any other ideas?
by Racekid21
Wed Mar 09, 2016 9:47 am
Forum: EMU STANDALONE
Topic: VW 16v ABF Trigger setup
Replies: 5
Views: 1365

VW 16v ABF Trigger setup

Hey guys, it's me again :D I want to run a Vw ABF 16V in full seqential mode non turbo, 9000 UPM. Crank trigger is 60-2. But what to do, to get a good signal of the cam position? I've got a 4-window distributor, is it possible to get it running as secondary trigger? How? Any other ideas to get a sig...
by Racekid21
Sun Mar 06, 2016 11:32 pm
Forum: EMU STANDALONE
Topic: Haldex controlling by Emu- PWM
Replies: 10
Views: 4411

Re: Haldex controlling by Emu- PWM

That sounds great to me! :idea:
So I do not have to feed the Stepper with PWM? You just connected it directly to the solenoid or what?
Do you have any refs. how the table could look like?
Thank you
by Racekid21
Sun Mar 06, 2016 7:18 pm
Forum: EMU STANDALONE
Topic: Haldex controlling by Emu- PWM
Replies: 10
Views: 4411

Haldex controlling by Emu- PWM

Hey there from Germany, I am looking for some examples to control my Haldex system. If you check the EMU Software, you can see, that there is one option to control PWM#1. What I know, is that the Haldex System works with an internal Bipolar stepper motor. I thought, that there could be a chance to c...
by Racekid21
Fri Nov 27, 2015 9:15 am
Forum: Announcements
Topic: Version 1.112
Replies: 35
Views: 26008

Re: Version 1.112

Hey, thanks for the quick response.

I tried that...but it didn't work.

I don't know what to do.

Greetings
by Racekid21
Thu Nov 26, 2015 1:51 pm
Forum: Announcements
Topic: Version 1.112
Replies: 35
Views: 26008

Re: Version 1.112

Hey,

if i download the new Version 1.155 , the program wont start. I had no problems with older versions.
Is there the possibility, that i can download an older Software Version?

Thanks !
by Racekid21
Tue Nov 24, 2015 3:03 pm
Forum: EMU STANDALONE
Topic: Flex Fuel Ethanol fuel scale
Replies: 11
Views: 2585

Re: Flex Fuel Ethanol fuel scale

Thank's ! That's a good point for getting FF started.

Greetings
by Racekid21
Wed Nov 11, 2015 10:16 am
Forum: EMU STANDALONE
Topic: LS2 Coil Question
Replies: 24
Views: 3287

Re: LS2 Coil Question

Could anyone please tell me the Partnumber of these Coils? I found something, but I don't know, if it's right.
12573190 That's the GM Partnumber.

Greetz
by Racekid21
Sun May 24, 2015 4:30 pm
Forum: EMU STANDALONE
Topic: Question about CAN feature.
Replies: 6
Views: 1354

Re: Question about CAN feature.

Das kann die Emu definitiv.
Setz dich am Besten mal mit Boba in Verbindung- der hat eine Klappe am laufen. Denke er kann dir da gut weiterhelfen.

Gruß
by Racekid21
Mon May 18, 2015 8:28 pm
Forum: EMU STANDALONE
Topic: Question about CAN feature.
Replies: 6
Views: 1354

Re: Question about CAN feature.

Um was für eine Klappe handelt es sich denn?
Gruß
by Racekid21
Mon May 18, 2015 8:27 pm
Forum: EMU STANDALONE
Topic: Full Sequential Injection VW 16V
Replies: 10
Views: 2007

Re: Full Sequential Injection VW 16V

Yes they are! And they are much cheaper than the Audi's.

They cost around 35 Euro.
by Racekid21
Wed May 13, 2015 1:59 am
Forum: EMU STANDALONE
Topic: Full Sequential Injection VW 16V
Replies: 10
Views: 2007

Re: Full Sequential Injection VW 16V

Because many people say, that there are no good coils for full sequence.

I want to go for a boost of 45 PSI- and around 8500rpm.
by Racekid21
Tue May 12, 2015 12:13 pm
Forum: EMU STANDALONE
Topic: Full Sequential Injection VW 16V
Replies: 10
Views: 2007

Re: Full Sequential Injection VW 16V

Okay, that's what i wanted to hear :).

So Injector Phase would be 1342
And Ign. also, but 1+4 and 2+3 cables paired.

Am I right?
by Racekid21
Tue May 12, 2015 11:57 am
Forum: EMU STANDALONE
Topic: Full Sequential Injection VW 16V
Replies: 10
Views: 2007

Full Sequential Injection VW 16V

Hi Guys, I'm planning the wiring for my 16V Turbo Engine. Is it possible to fire with Wasted Spark, but inject in full sequence? What else could I do? I would like to trim each Injector- if the Exhaust Temp's would have big differences. I have a Cam and a Crank-Sensor. Maybe answers in German? :D Th...
by Racekid21
Mon Jan 19, 2015 12:05 am
Forum: Announcements
Topic: EMU Software 1.1 BETA 1 already available!
Replies: 10
Views: 8952

Re: EMU Software 1.1 BETA 1 already available!

Works great! Thanks a lot :))))
by Racekid21
Mon Jan 05, 2015 5:13 pm
Forum: EMU STANDALONE
Topic: Starting the first Tune
Replies: 4
Views: 1433

Re: Starting the first Tune

Hi Jan, sauber! Vielen Dank! So in etwa mit der AFR Tabelle hatte ich es mir auch gedacht- also, dass sie auf die VE zugreift und dann um den Prozentwert trimmen kann- war mir aber aufgrund der nicht ganz so klaren Beschreibung unsicher. Dann werde ich genau so vorgehen- macht für mich auch am meist...